Only the best ceramic irons. Review and rating 2019

Ceramic iron is a necessary tool in the arsenal of any housewife. A ceramic iron will facilitate domestic work, significantly reduce ironing time, and also simplify this difficult process. To use the full potential of this device, you need to know some subtleties associated not only with its device, but also with the principle of operation. The pros and cons of different models, short reviews, as well as the 2019 rating will be presented below.

How to choose the right iron with ceramic sole

Putting aside the popular materials of the soles of the iron (stainless steel, aluminum, Teflon), you should pay attention only to ceramics or cermets. The ceramic sole of the iron provides sufficient glide on the surface of the laundry. A similar effect cannot be achieved using instruments with other materials.

The advantages of ceramics:

1. Not only a quick warm-up of the sole, but also the safety of heat for a long period of time. Because of this quality, such devices are very economical in energy consumption.
2. The surface is easy to clean, but only using special tools. They not only soften the dirt, but also keep the sole from minor scuffs and scratches.
3. Of all types of irons, only ceramic have the highest slip coefficient. Therefore, the quality of ironing is increased.

The cermet device is not too different from ceramics, but its service life has been increased. Adding a metal component to the base of the iron pad reduces material fragility. The remaining qualities are completely similar to ceramic products.

A long time has passed, when the iron was a pound steel piece, which had to be put on open fire to warm up. Now, in addition to its main function, these home tools are capable of performing a host of others.

Additional features that modern irons provide:

1. The presence of nozzles for delicate ironing. A very useful addition to the iron, which allows you to smooth delicate and expensive fabrics such as silk. It is a plate in shape that repeats the sole of the iron, which is mounted on the bottom of the device using special clamps. The main function is to prevent the temperature from exceeding the permissible measure.
2. Hot steam function. It is installed on almost all modern devices. It is very convenient to use when ironing dry laundry. Steam is supplied to the surface of the laundry through specially holes in the sole of the home tool. The quality of the ironing is affected not only by the diameter of these holes, but also by their number and location. On some models, a regulator can be installed to help you adjust the steam wave for any type of laundry.
3. Spray. It is installed at the top of the iron and is a small device that, when you press the button, releases a stream of water. It is convenient to use when ironing those types of fabric that are undesirable to steam.

What is the best sole, what functions the iron can have, was described above. The following is a ranking of irons in 2019 with small reviews of only the best models.

Tefal FV3925. Reliability in simplicity

Tefal is a company that has dedicated itself to simplifying the household lives of millions of families. All household appliances with this logo are of excellent quality, as well as a long and trouble-free operation. FV3925 is no exception, but only confirms the rule. This iron does not have stylish shapes and sophisticated design, but it is practical, durable and reliable.

1. The power of the iron is 2300 W, which is a good indicator among similar devices.This power allows you to iron clothes quickly and only once.
2. A steam boost of 125 g / min ensures quick ironing of difficult surfaces.
3. Tefal's Durillium metal-ceramic sole has a self-cleaning function and eliminates the need for expensive cleaning products and does not clean the iron, the ceramics of which can be cleaned independently.
4. An additional setting adjusts the amount of steam depending on the set temperature. This feature prevents the increase in steam flow and possible tissue damage.

The only disadvantage of this French invention is the lack of a measuring cup, which should come with the device. Otherwise, the device received a maximum of positive reviews from users for its reliable functionality. The cost of Tefal FV3925 starts at 4,200 rubles.

Bosch TDA2325. Quality steam

The German representative of TDA2325 has a steam generation function and a simple design that everyone understands. This iron is able to answer an important question: ceramic or cermet? Which is better, TDA2325 will prompt. This device is designed for high-quality dry ironing and easy gliding on the surface, which only reliable metal ceramics can provide.

A regulator is installed that controls the flow of steam. A rod that performs the function of self-cleaning is combined with it. In addition to it, iron cleaning also takes place through the sole of Palladium-glissee.

The average power is 1800 watts, which is enough for normal ironing of even difficult surfaces. The water tank is completely transparent, which allows you to control the liquid level. In addition, a special scale is applied to it. Steam flows vertically, which allows it to penetrate into the very depths of the fibers of any kind of fabric and provide a more thorough ironing.

The design and technical component of the TDA2325 is thought out for the frequent and uninterrupted operation of the device. Of the minuses, you can specify only the average power. This is sometimes reflected in negative customer reviews. But Bosch's quality has been earned over the years and has virtually no complaints. The price is more than affordable and starts at 2,000 rubles.

Scarlett SC-SI30K15. Inexpensive, but high quality

This model can be called a budget, pricing for it starts at 1300 rubles. But this does not mean that the SC-SI30K15 is an unreliable tool. This iron has all the necessary functionality and is able to perform those functions that perform models with a higher cost.

1. This iron turns off automatically if a long period of time does not work. Such a function is additional protection, preventing the user from burns.
2. A spray is installed on the top of the iron.
3. Not only the self-cleaning system of the device, but also protection against scale.
4. Powerful steam boost, which is 120 g / min. This allows you to cope even with coarse and dense material.
5. The power of the iron is high, it is 2400 watts.

Iron SC-SI30K15 during its operation has acquired a sufficient number of positive reviews. But even the most ideal tool has its own flaws. In this, for example, insufficient quality of the plastic of which the body is made is noted. As well as a fixed hinge of the cord through which the device is connected to the network. Such a hinge creates inconvenience during ironing and does not allow the iron to be used at any angle.

Philips GC 2960. More powerful, even better

Good quality at an affordable price. This model has high power (2200 W), as well as a host of other positive characteristics. The sole of Steam Glide is cermet, only the basis is high-quality stainless steel. Thanks to its good power, this iron is capable of producing a steam boost of 130 g / min and a constant steam strength of 40 g / min. A special system prevents fluid from flowing through the holes on the sole. The cord for connecting the device to the network has a length of 2 m. This does not create inconvenience when operating the device.

There are also additional functions: automatic shutdown after a long period of inactivity, steam supply at a vertical angle, self-cleaning. The main disadvantage of the GC 2960 can be considered its weight, which is 1.2 kg. But this drawback is very convenient when ironing. There is no need for a strong pressing of the device on the surface of the fabric.

Zelmer ZIR 08800. Available for any family.

Model ZIR 08800 from a little-known representative of Zelmer has very good quality and affordable price. The pricing policy for this device starts at 1900 rubles. At the same time, the iron is not much inferior to more expensive brothers. Permanent steam is supplied at a speed of 25 g / min, and the steam boost is 105 g / min. A small reservoir of water holds 230 ml of liquid. The device has a completely normal design, without unnecessary accessories and additional frills. Ceramic coating, Geram Gliss.

This model is designed to work reliably every day. A large number of holes of different diameters on the sole provides careful steaming of the fabric surface. ZIR 08800 will meet the expectations of any family. Deciding on the choice - ceramics or non-stick, you should choose ceramics. The best quality that can only be seen on the ZIR 08800.

What conclusions can be drawn

Ceramic and cermet irons are the most popular among users. The sole made of this material does not make you worry about constant cleaning, and also provides high-quality slip on the fabric surface. The above models represent a variety of companies that have managed to prove themselves from the best side. When purchasing an iron with a ceramic coating, you should pay attention not only to the quality of the sole, but also to the additional functionality of the device. Different devices, having the same price, may contain a larger number of additional functions. It is also important to pay attention to the warranty period, which may vary depending on the company of the manufacturer.