Products of the Perm Machine-Building Plant - the new Ural chainsaw is known in Russia and abroad. Higher productivity than that of the counterpart, Druzhba Saw, allows it to be used for professional and domestic purposes.
Content
Ural tool specifications
A quality indicator of the Ural brand is a powerful and economical two-stroke gasoline engine. Convenience in operation and lightweight construction make it indispensable in such works as the construction of a wooden house, a sawmill, logging, household billets for the local area. Consider the characteristics of the Ural chainsaw with a detailed description of the advantages of the tool.
Gas engine
Designed for professional purposes, the Ural 2 Electron chainsaw has the following engine characteristics:
- Power 5 L from.
- Single cylinder
- The piston diameter is 5.5 cm, the cylinder volume is 109 cubic meters. cm.
- Push pull
- Gasoline consumption at the highest power - 0.63 liters, while working - 0.47 liters.
- The frequency of crankshaft operation cycles is 2600 rpm.
The two-stroke engine is powerful and reliable enough for quick cutting of wood within 11 m3. per minute.
Cylinder
To improve wear resistance, the aluminum cylinder is coated with a silicon-nickel alloy called nicosil. The volume of the cylinder is 109 cubic meters. cm provides sufficient power for a chainsaw. The cylinder has an inlet for the gas-gas mixture, exhaust and purge channels. The execution of certain proportions of the sizes of the outlet and purge openings provides high-quality ventilation from the exhaust gases of the cylinder cavity.
Gas tank
The volume of the tank for fuel is 1.6 liters, and for oil - 0.24 liters.
To increase the durability of the engine, use the gasoline brands specified by the manufacturer in the passport. In a two-stroke engine, it is worthwhile to use special brands of oils that connect well with gasoline and do not leave a large residue when burned in a chamber.
The gas tank is filled with a mixture of AI-72 gasoline and M-8B engine oil. In the summer, the lubricant tank is filled with oil, and in winter - with the addition of gasoline in the ratio 3/1.
Carburetor
A carburetor is necessary to create an air-fuel mixture of a adjusted proportion that enters the cylinder in certain doses. The tool uses a modification of the carburetor KMP-100U. It must be adjusted at the factory, however, you can independently adjust the unit in various operating modes to obtain maximum engine efficiency.
Before the first operation, it is recommended to hold the tool for several hours with a fuel-filled tank for soaking the carburetor membrane.
Tire length and chain
The length of the working surface of the saw is 46 cm. A cutting chain is put on it, requiring periodic sharpening and tension.
Tip: during prolonged downtime of the tool, it is better to remove the cutting chain, and sharpening is more convenient on a chain dressed on a saw.
The weight of the chainsaw in the assembly is about 12 kg.
Ease of use
The Ural 2 chainsaw Electron is equipped with high comfortable handles-holders, allowing you to work in an unbent pose and under thick snow cover. The tool frame and holder are equipped with vibration-reducing hinges and spring assemblies for safe operation of the operator. The unit maintains its working condition in the range of high and low temperatures. High engine power speeds up the workflow.
Features of the Ural 2T Electron chainsaw
The unit can be used for sawing wood perpendicularly and along the fibers. Forced lubrication of the chain, ease of use, high power make the unit indispensable in everyday life.The manufacturer has developed instructions for using the tool in extreme climatic conditions for additional adjustment and self-repair.
The components of the new chainsaw:
- Two stroke engine.
- Starter.
- Saw blade with chain.
- Gas tank.
- Gearbox.
- Steering arms.
- Muffler.
- Carburetor.
- Start button.
Chainsaw dimensions: 88 x 45.5 x 50 cm.
Before starting work, it is necessary to run the unit at idle for several hours, gradually applying small loads. By adjusting the proportions of the injected fuel-air mixture, affecting the engine speed, you need to switch to the operating mode of the tool. 3 screws are responsible for the adjustment for high, low revs and for idling.
The advantages of a chainsaw include:
- Reasonable price and low cost of operation.
- Durability of product units.
- The technical characteristics of the Ural 2 chainsaw Electron include good power, the strength of the gearbox and the working part, which allows you to work with solid wood.
- Work in difficult temperature conditions.
Reasonable price and sufficient power make the Ural chainsaw popular in the market of cutting tools.
I didn’t understand, the joke of the galleries? What the fuck was a new saw !!
the author himself worked as a Ural saw when the end of the working day his hands hang from her to the ground and her back is not bent
11 cubes of wood per minute, cool! And where to buy such a saw? KAMAZ firewood worked for 2 minutes.
hemorrhoids and not a chainsaw. calm coils. I sawed wood with the Urals in my youth, the sensations are still those, of course it’s convenient to cut the forest. Of course, in comparison with friendship, it was more powerful and reliable just at that time there was nothing to compare with. and friendship generally sucks. how many nerves she ate for me.