Are you dreaming of getting perfectly smooth, neat grass on your lawn, but can't achieve this? Is the grass too tall and have to be cut several times in one place? And even if you managed to mow everything, as a result, the unevenness of the earth is on display? It does not matter, adjusting the cutting height helps to cope with these problems. All lawn mowers are equipped with such a function, and if used correctly, the effect will be amazing. Now let's compare what is the best adjustment.
Content
Comparison of adjustments
When buying a lawn mower, you must first study its technical characteristics. The cutting height range should be indicated there, namely the minimum and maximum value. It is better to choose a quality tool where the range is sufficient: a minimum of 2 cm and a maximum of 7-8. The fact is that this range allows you to make the surface smooth and get rid of tubercles and other irregularities.
Also be careful how many fixing positions the mower has. Inexpensive models have only 3 positions, while more expensive equipment - 5-7 each. And this greatly simplifies the work and extends the possibilities of haircuts.
There are manual and mechanical adjustments. In the first case, you will need to adjust the height manually, in the second - without any physical effort. There are three main types of adjustments, which we compare.
Manual adjustments using tools
The most common adjustment option. It is found on the simplest lawn mowers: inexpensive electric or gasoline.
The plus is that you tighten the bolts yourself, see how it works and you can always replace them if necessary. But despite the fact that this method is reliable and safe, it has a number of disadvantages. First, you need certain skills. Secondly, it is long and difficult. Thirdly, you will need to stop the engine and pick up a wrench. All this greatly complicates the process of mowing grass. In this case, a mistake cannot be made, otherwise the lawn mower will not live long. However, many users choose this type of adjustment due to its reliability.
Manual adjustment of cutting height with levers
Adjustments of this type are considered partially mechanized. They are installed on household and semi-professional models. Here the height of the wheels and the wheel axle is changed using the installed levers. There can be two (in such models they change the location of the rear / front axle) or four (the position of each wheel).
When working with such tools, you still have to turn off the engine and make an effort, but this is much easier than unscrewing the wheels. It is reliable, practical and convenient - you won’t need much time. The main caveat: you need to double-check whether everything is tightened the same way, otherwise there is a risk of damaging the lawn mower or the lawn will turn out to be crooked.
Central adjustment
This option is fully mechanical. No need to stop the mower or double-check the result. You just need to put the lever in the right position and the wheels simultaneously rise or fall. With such an instrument, physical strength is not needed, you do not have to spend much time - everything is done in a matter of minutes.
Central adjustment is set on semi-professional, professional and premium models. They cost an order of magnitude more expensive lawn mowers with manual adjustments, but they have additional functions (side discharge, mulching).Another minus is the possibility of failure. If this happens, it will be difficult to repair the car yourself.
Which is better?
Summarize. Lawn mowers are different, and depending on your lawn and budget you need to choose the most suitable. If you focus on speed and convenience, it is better to choose a tool with central adjustment. Such a lawn mower is more modern and has nice bonuses in the form of additional functions. But if the budget does not allow, it is better to choose a car with manual levers. Although it requires more time and attention, it is easier to deal with it than with a wrench. So pick up for yourself and transform your lawn with maximum comfort.
