The old hand saw was replaced by a circular saw with great functionality. The circular saw rating presented in the article is based on expert ratings and user reviews. It included electric saws from popular manufacturers of all price categories. Light models are also presented, with great power and a smooth start.
Content
Inexpensive models (up to 3000 rubles)
MILITARY DS1250
- Great build;
- Power 1250 W;
- Weight 3.9 kg;
- Convenience and reliability in use.
- The fragility of the reference pad.
Compact, good tool with an ergonomic body. Diameter of a disk is 18.5 cm. Adjustment of an inclination of a sole is available. Properly set the depth and angle. Designed for cutting work in all planes. Hardy, copes with declared speeds and does not overheat.
Hammer CRP 800 LE
- Weight 3,5 kg;
- Quietly works;
- Long wire (soft);
- Convenience in use;
- Qualitatively sawing;
- The vacuum cleaner is connected.
- On the line you can not put less than 1 cm;
- Weak support area.
Budget saw with an 800 W motor and a 14 cm disc. Sawing bars up to 45 mm and do not twitch when cross cutting. Perfectly balanced. 4000 rpm. The lock insures against accidental switching on.
Vortex DP-160/1300
- Engine 1300 W;
- The vacuum cleaner is connected;
- Cut wood up to 50 mm thick;
- Compactness and weight;
- Comfortable to hold;
- It does not work loudly.
- Thin sole;
- Not a solid depth adjuster.
The tool is great for the home workshop. Makes cuts at several angles, incl. 45 °. A 16 cm disc rotates at a frequency of 4,500 rpm. A casing is provided for protection against injury. There are detailed instructions in the kit.
Middle segment (from 3,000 to 10,000 rubles.)
Makita HS7601
- High-quality assembly and cut with a tilt angle of 45 °;
- Design;
- Rubberized handles with vibration protection;
- 2 branded discs included;
- Almost no noise.
- Key holder.
Powerful (1200W) ergonomic power saw with a 19 cm drive. The cast platform is strong enough, dust protection is reliable. It weighs 4 kg. In a capacious case it is possible to store disks.
DeWALT DWE560
- Performance;
- Cable 3.5 m;
- It is convenient to set the angle of inclination;
- The blowing system and the shape of the metal sole do not block the view.
- No soft start;
- The 18.4x1.6 cm disk is not used much and the frequency (5500 rpm) is not adjustable;
- It is inconvenient to measure the depth of the saw.
Circular with a mass of 3.3 kg and a power of 1350 watts. It copes with 65 mm wood in the carpentry workshop and in the construction of facilities.
Hammer CRP 1300 D
- All adjustments;
- Vacuum cleaner connection;
- There is a laser and side emphasis;
- Cut to 55 mm;
- Equipment.
- Quality parts.
Saw with a long cord of 1.3 kW at a speed of 4700 rpm. The diameter of the hard alloy soldered disk is 1.6 cm. Mobile work in different planes with an inclined angle of 90-45 °. Chipboard saws, wood, aluminum and other materials. Protective cover. The start button is locked.
The most expensive (from 10 000 rub.)
Makita SP6000
- Design and settings;
- Smooth start;
- Professional equipment and equipment;
- Technical capabilities
- Smooth edge for precise cutting;
- Protection against overloads and injuries.
- Outsole mount;
- 2.5 m cable
One of the sought-after tools in the ranking among hand-held electric circular saws designed for work at home. Its power is 1300 watts, weight - 4.4 kg. The diameter of the blade is 16.5 cm with a saw depth of 56 mm.The speed when cutting corners in any plane is adjustable from 2000 to 5200 rpm. Vacuum cleaner joins.
BOSCH GKT 55 GCE
- Quality materials and workmanship with ergonomics;
- Motor control options;
- Adjusting the depth of cut and angle;
- 3 year warranty (registration on the manufacturer’s website).
- No guide rail included.
The model for professional use occupies a leading position in the top. An engine of 1400 watts with a mass of 4.7 kg easily cuts material up to 57 mm. It is possible to connect a vacuum cleaner. Cutting wheel - 16.5 mm.
DeWALT DCS576N
- Durability, ergonomics and style;
- Workmanship;
- Backlight and brushless motor;
- Propyl 61 mm at 90 ° and 43 mm at 45 °;
- Productivity due to 5800 rpm.
- Turnovers are not regulated;
- Tires of other brands are not suitable.
A 1.5 kW cordless saw is able to work without electricity. On one charge, up to 90 bar in 0.5 cm. Weight 3.7 kg and 190 mm disk circle. There is a protective cover.
The most powerful
UNION CPS-50200
- Power 2.5 kW;
- Installation on a table is possible;
- Resource 20cm of a disk circle to 70 m;
- 2 years warranty;
- Reliable and strong steel platform.
- Branded wheels are expensive.
Great functionality, including use as a machine. Precise cutting of 65/43 mm at angles of 45/90 ° lends itself to joinery, chipboard and fiberboard. The steel wedging knife prevents clamping of the disc and overloading the motor. There is a start button lock and a safe cover. Propyl is adjustable on a scale. Weight is 8 kg.
DIOLD DP-2,4-235P
- Engine 2.4 kW;
- Circular saw 23.5 cm;
- Cut at a right angle of 85 mm;
- Stationary installation;
- The mechanism for blowing sawdust;
- Equipment.
- Dust box mount for add. use.
One of the best compact circular saws for wood and plastic in the ranking of 2019. It serves long and reliably. Cut sizes are adjustable. The frequency of revolutions per minute reaches an indicator of 6000.
Edon PCS235-85
- Motor 2680 W;
- Cut to 90 mm with a saw wheel of 235 mm;
- You can use a dust bag and a guide rail;
- Thoughtful design.
- There are negative reviews.
An electric tool for the most comfortable work with wood, laminate and plastic. It is convenient to hold in hands. Cut bevels available up to 45 °. Speed 4800 rpm. You can control the wear of the brushes due to their output to the outside.
With the presence of a soft start system
ZUBR ZPD-2000
- 2 kW motor;
- Endurance;
- Convenience in use;
- Flat cut;
- Smooth running;
- 5 year warranty.
- Mounting the casing, the sole and the guide.
The circular is difficult to use as a manual model, so it is attached to the table. At the same time, sawing timber, chipboard and fiberboard using a disk with many teeth in all directions. Ideal for rough work on thick material.
Makita HS301DWAE
- It is convenient to work without wires;
- Easy to operate with one hand;
- The set includes a carbide saw blade.
- Weak charge;
- It’s hard to find wheels.
A mini circular weighing 1.6 kg is powered by a battery (there is an indicator). It is convenient to take with you. The disk size is 85 mm. Gently and quickly saws wood blanks. On a special scale, a slope of up to 45 ° is set and clamped.
Vortex DP-210/2000
- 2 kW motor;
- 210mm disc diameter;
- The cut indicator is set to 75 mm;
- Compactness and weight;
- The dust collector joins.
- It makes a lot of noise;
- Weakness of the depth setting lever.
An ideal table saw for giving with turns of 5500 a minute. Rubber grip handle. Special disc wheels allow you to cut metal, plastic and laminate. There is a system against accidental start and a protective casing.
Lightweight Hand Models
BOSCH UniversalCirc 12
- Comfortable to hand;
- Simple handling;
- Operating time from a full charge;
- Neon lights;
- There is a dust adapter.
- A bit of features.
Cordless model with a quality 85mm blade for clean and precise cuts. Easy to set bevel angle in wood materials up to 26mm depth. Suitable for cottage and homework. Weighs 1.4kg.
Makita HS300DWE
- No noise;
- Performance;
- Charging and 2 batteries included;
- Blow function
- For thin material;
- No backlight;
- Weak charge and power.
The weight of the electric saw is 1.5 kg. Comfortable grip. 85 mm drive speed - 1400 per minute. For sawing at 45 °, 16 mm of wood, plywood and other material lends itself. There is a suitcase to carry.
DIOLD DP-0.55 MF
- Comfortable grip;
- There is a suitcase.
- Turnovers are not set;
- Average ergonomics;
- Side rail bracket size.
500 Watt motor. Worm gearbox. Disk circle - 85 mm. Sawing depth - 25mm. A dust bag is required. It requires lubrication and does not tolerate large overloads.
Top manufacturers
Bosch
Well-known brand with 133 years of experience. German quality and reliability. The main product line for professional use. There are instances with the engine 400 - 2200W. Saw blade 65 - 235 mm with revolutions of 2100 - 6250 per minute. Weight 1.9 - 7.8 kg.
Guide rails are used for precise cutting. The depth of the saw varies in size 16 - 85 mm. Many models are endowed with great functionality.
Makita
Japanese company producing more than 1000 items. The instrument of this brand is popular and sell in Russia. Its manufacturing enterprises are also concentrated in Romania, Germany, and Great Britain. The main characteristics of the products are efficiency, carbide pads included in the kit, diamond spraying.
By power, all products are classified in 3 categories - up to 800 W and 1200 W, over 1.2 kW. Depending on engine power, conditions are applied to varying degrees.
Hammer
The German brand produces measuring equipment and other electrical household, garden and semi-professional tools. They use high-quality materials with a long service life. Almost all products are equipped with branded spare parts. In particular, guide rails.
Saw sets are equipped with automatic lubrication, cooling system, various settings and adjustments. The latest production technologies are applied.
So, the rating will help you choose a circular saw for any purpose, taking into account the needs and financial capabilities of customers.
