Do I need to buy a special WIFI adapter for my Philips TV? It is necessary if the model of the device of this brand is equipped with the ability to activate Smart TV, but does not have a built-in device for connecting to a wireless network. In fact, a situation where a television receiver has Smart TV technology in the list of additional features, but is not equipped with a built-in Wi-Fi signal converter, arises quite often.

In this case, you will either have to connect the device to the Internet via a cable, which is not very convenient, or purchase a special adapter that will allow you to connect the TV to the WI-FI network. But first things first.

What is a WIFI adapter

WI-FI adapter is a special device that allows you to connect a wireless Internet connection to the device. He acts as an intermediary who receives a signal, converts it, and then transfers it to the device to which it is connected.
In addition to receiving and transmitting a WI-FI signal, such devices can significantly expand the functions of devices, in this case a TV, by activating the capabilities of smart tv.

The benefits of using removable Wi-Fi converters for television receivers are as follows:

  • quick connection;
  • lack of need for laying an additional cable;
  • high speed of signal reception / transmission;
  • simplicity in operation;
  • compact dimensions.

The disadvantages include the waste of money on the purchase of additional equipment. Often, devices such as removable USB-converters for TVs are quite expensive. And the main disadvantage is that television receivers are not able to recognize ordinary universal devices that are used for computers, tablets or laptops. For each device - a representative of a brand of one or another manufacturer, an adapter of only the same brand is suitable and no more. So, for Philips TVs, there are two models of network converters, the characteristics and capabilities of which will be discussed later.

Phillips brand Wi-Fi receivers

For Phillips brand television sets, the manufacturer provides two models of adapters - PTA128 / 00, PTA01 / 00. The Wi-Fi adapter for the Philips TV is installed via the USB port in the side of the device. The important point is that these converters are not suitable for all Phillips TV models. You can view the list of device models that are able to recognize and support the connection of PTA01 and PTA128 on the manufacturer’s official website.

Model PTA128 / 00 is:

  • high connection speed;
  • the ability to install a special plug and play program;
  • increased range due to the double antenna.

The PTA01 / 00 is another representative of Phillips transducers. The model is widespread among users, although it is more expensive compared to the previous representative. Using PTA01, the user receives:

  • high speed connection;
  • data protection using WPA2 encryption;
  • install plug and play.

The capabilities of Smart TV when connecting Wi-Fi converters include:

  • control the TV and Smart TV using a tablet, phone or keyboard;
  • viewing photos, movies;
  • audio playback;
  • viewing programs at a convenient time even after going on air;
  • a large number of Internet applications.

PTA01 / 00

Connect and configure Phillips adapters

The procedure for connecting the PTA128 and PTA01 network receivers and their setup is quite simple thanks to the clear interface of this brand of television receivers. Consider the sequence of actions when connecting the converter to the device:

  1. Find the USB connector on the device panel. Most often, such a connector is located on the side of the TV.
  2. Insert the adapter into the connector. If necessary, you can optionally use a USB cable.
  3. After the device is connected, the program for installing and configuring the wireless network for the device starts.
  4. After starting the program, a step-by-step instruction on setting up a wireless connection will appear on the screen, which you must follow.
  5. For installation, you can use WPS, if available, on the router.
  6. In the absence of WPS, the WPA password is used, after which the device will connect to the network.

Thus, the process of connecting and configuring a network converter is simple and affordable for any user. Before buying this type of Wi-Fi signal receiver, you need to make sure that your TV model is capable of supporting wireless network connection. You can usually find this information in the instructions that came with the device. For such devices, a special type of marking on the package is also provided. The Wi-Fi Ready mark indicates that the device does not have a built-in device for receiving a Wi-Fi signal, but it is possible to connect additional devices to establish a wireless connection.