Choosing a juicer for solid fruits and vegetables

Freshly squeezed juices are good for health, but today we will talk about products that are designed to help gardeners and gardeners prepare the collected fruits in the form of juice for long-term storage. It is a juicer for solid fruits and vegetables that has all the possibilities to process large volumes quickly and with excellent quality.

Those readers who are interested can find out the individual differences, advantages and small flaws of this household appliance by carefully reading this article.

Types of Juicers

According to experts, only three types of products can actually grind and squeeze juice from solid fruits:

1. A centrifuge juicer is the most popular product of the types presented, it works as follows: whole fruits fall on the blade, where they are crushed to the desired consistency. The juice is pressed through a fine sieve made of stainless metal, due to the high speed of the centrifuge. Squeezes the juice of this device quite quickly and efficiently. The only drawback: during the spin process, the juice may heat up a little, while losing some of the vitamins.
2. The screw juicer is the smallest model; during its operation, the juice is squeezed out due to the active grinding of fruits on the principle of a household meat grinder using a screw. The pros include:
   • low noise impact;
   • wide range of permitted products;
   • very high performance.

   When pressed, the juice does not oxidize, which means that there is no loss of useful properties inherent in nature.

3. Press juicer from all presented works on the principle of a classic hydraulic press. As a result of this process, natural juice is obtained with stored vitamins, as well as nutrients. The only negative is that you need strong men's hands.

Advantages and disadvantages

The device of modern units for squeezing juice is simple, therefore, any housewife can cope, while making a minimum of effort during operation and maintenance of the product. The neck is designed in such a way that whole fruits are laid, so there is no tedious preliminary preparation for cutting, removing seeds, and core.

Due to the high speed of rotation of the chopper, all parts go into business, and the spinning efficiency is greatly increased, you just need to properly organize the speed of the fruit, so as not to overload the product. Models have several speeds for different fruits, vegetables, so you don’t need to buy a special device for processing citrus fruits.

The positive advantages include a security system, for example, the product will not turn on if any of the parts is loosely fitted or loosely fixed. The spin cycle is equipped with an effective noise reduction system, so when working in the house a comfortable atmosphere is created, the price does not increase.

For all models, the chopper parts and the mesh are made of food-grade stainless steel, therefore, the acids contained in vegetables and fruits do not affect them. The added carbon greatly increases the wear resistance, making the models last much longer.

Some particularly picky housewives complain that juicers need to be thoroughly washed after each use, while they are first dismantled and then assembled back. But this can not be considered a minus, so it is necessary to care for almost all household appliances.

Criterias of choice

Remember - the future owner must know exactly what he needs a household appliance for: for example, if you want to drink a glass of freshly squeezed juice every morning, then you should not spend money from the family budget on the purchase of a powerful juicer for hard fruits or vegetables. It is enough to purchase a device with less power and volumes.

It is difficult to choose the right device, because the stores offer a fairly wide range, without preparation you will not buy the right model. It is necessary to determine in advance the scope of use of the future assistant in order to know exactly what power and performance are needed, because these parameters affect the cost of the model. Enhanced functionality also adds a percentage to the final price.

It is worth paying attention to the speed of rotation of the centrifuge and the duration of the product without overheating the engine. The degree of processing of the product depends on the first parameter: for example, the process of grinding is important for carrots and turnips: the better it is, the more juice will be produced. For example, if we take a domestic model with a power of 320-400 watts, then its performance at a rotation speed of only 1850 rpm will be from 60 to 70 l / h.

Operating time is a rather important indicator, because a powerful engine heats up quickly, and to avoid the negative effects of overheating, you will often have to take breaks. However, at this time, you can clear the container of cake and wash the next batch of vegetables for processing.

Many foreign manufacturers set the rotation speed above 10 thousand rpm, but the cost of such products increases almost twice as compared to domestic models. Some models have up to three speeds, so you can squeeze juice from fruits of different densities, so you need to be careful and do not hesitate to study the technical passport of the product in detail.

It’s worth spending a few hours to choose the best option, but as a result, the best model of the juicers offered by sellers will be the perfect assistant during the seasonal harvesting at your household plot.

Additional enhancements

Many manufacturers add such technologies:

1. Smooth start of the engine is found in all universal products. The electric motor does not gain momentum immediately, but gradually, while the squeezed juice is not sprayed. With this option, household appliances last much longer.
2. Drop-stop is a rather convenient and useful function for juicers of any type. With its use, the countertop will always be clean, while not a single drop of juice will spill past the container. There are two options - after the end of the spin, the user turns the spout of the device up or to the side, or a special clip blocks the flow of juice out.
3. Magnetic fuses are designed to eliminate the possibility of inserting a part incorrectly. By marking the sides with different miniature magnets, manufacturers exclude this possibility.
4. Rubberized legs can have special suction cups for fixing the product on the table top. This is especially true during centrifugal spin.

In addition, there are other options, but some of them can significantly increase the cost of the juicer.

Model Overview

Bosch MES4010

• Case Material: Aluminum
• Power: 1.2 kW
• Loading hole diameter: 84 mm
• Max rotation speed: 11000 rpm
• Tanks:
• for juice - 1.5 l
• for pulp - 3.0 l
• Dimensions: 322x211x425 mm
• Weight: 5.6 kg
• Warranty: 12 months
• Manufacturer: China

An excellent quality model from the German concern BOSCH has three processing speeds and mechanical control, assembled at Chinese factories, but this does not affect the duration of operation.

Philips HR1836 Viva Collection

• Material:
• cases - aluminum
• containers for juice and oilcake - plastic
• Power: 500 W
• Loading hole diameter: 55 mm
• Max rotation speed: no data
• Tanks:
• for juice - 0.5l
• for pulp - 1.0 l
• Dimensions: 200x230x310 mm
• Weight: 1,769 kg
• Warranty: 2 years
• Manufacturer: Philips, Netherlands

Experts tested this model, the conclusion is a completely reliable and high-quality device. Spin efficiency is not a strong point of the product, but in proportion to power and compactness everything is normal.

Panasonic Auger MJ-L500

• Case Material: Plastic
• Power: 150 W
• Size of loading hole: 35x50 mm
• Juice extraction efficiency: 77.65%
• Noise Level: 65dB
• Dimensions: 190x180x430 mm
• Weight: 4.0 kg
• Warranty: 1 year
• Manufacturer: China

This medium-speed, high-performance screw juicer is ideal for urban use to squeeze fresh and frozen fruit juice.

Penzmash SVPR-201 Salute

• Case Material: Plastic
• Power: 400 W
• Max rotation speed: 1850 rpm
• Productivity: 70 L / hour
• Dimensions: 340x320x390 mm
• Weight: 13 kg
• Warranty: 1 year
• Producer: Penzmash, Russia

Domestic development of the Penza plant is useful to gardeners and gardeners for processing crops, it is unpretentious in everyday life and requires a minimum of maintenance.

Neptune KAZHI. 32215.001

• Case Material: Plastic
• Power: 320 W
• Productivity: 60 L / h
• Processing speed: 120-180 kg / hour
• Spin efficiency: 55%
• Dimensions: 545x390x355 mm
• Weight: 7.0 kg
• Warranty: 12 months
• Producer: PJSC Neptune, Russia

The development of engineers from Stavropol will be useful to users who process crops from the garden and the vegetable garden into juice, the product has a service life of up to 7 years.

Kursk OAO Instrument Summer resident SVPR-201

• Case Material: Plastic
• Power: 280 W
• Productivity: 1 kg / min
• Spin efficiency: up to 50%
• Juice purity: up to 92%
• Dimensions: 385x385x44mm
• Weight: 10.5 kg
• Service life: not less than 5 years
• Producer: OAO Pribor, Kurs city, Russia

This model will prepare juice in an uniquely short time, while you do not have to cut vegetables and fruits, except cabbage and watermelons. Due to its high productivity, processing the crop will take you not so much time.

findings

Juicers are needed not only for squeezing fresh juice for children or in the morning instead of breakfast in a city apartment, but they are also great assistants for processing crops from the garden: the high performance of individual models reduces the process of squeezing juice and facilitates the work of users.