You decided to make repairs and remembered that you need a bunch of tools. Starting to choose in the store, one is faced with the inability to take everything in one place. Yes, and prices "bite." Is it really necessary to shovel many exhibition stands and go through several stores because of 5-6 tools? But there is a well-known outlet - an international online store. Here you can choose the right one without leaving your chair, and pick up the entire instrument in one place. The prices are lower than the store prices. Consider common repair tools.

Digital level

This level measures angles in the range of 360 ° - horizontal and vertical. The vertical display shows the tilt angles of the instrument. The instrument is similar to the bubble level. In contrast, tilt angles are displayed digitally. This gives a measurement accuracy of up to 0.1 °, which is more accurate than the "by eye" definition. The composition of the kit is provided by:

  • two AAA batteries for up to 2,000 hours;
  • 4 magnets built into the base plate;
  • digital level with 1 inclinometer;
  • instruction manual.
To correctly display the result, the digital level must be fixed in the measurement state for a couple of seconds. The power turns off automatically.

Building hair dryer

The use of this tool depends only on the imagination of the builder:

  • drying of products;
  • soldering metal;
  • simplification of disassembly of metal compounds;
  • heating adhesives;
  • welding and bending of plastic pipes;
  • warming up frozen pipes;
  • barbecue ignition.

This is not a complete list of the possibility of using a building hair dryer. Adjusting the temperature of 55-550 ° will ensure operation in a different temperature range. A power of 2 kW will allow you to quickly warm up the air flow to 350 l / min. The digital display will show the exact temperature of the exhaust air.

Equipment:

  • air gun;
  • nozzle;
  • instructions for use.

Plaster sprayer

Plaster leveling is a difficult job. No wonder they charge dearly for her. The material should be applied evenly, in a dense layer, without voids and sinks. Applying, spreading thick material exhausts physically and requires skill. Fortunately, progress does not stand still. Now a similar tool can be ordered in the online store. It is called a hopper bucket.

A reliable tool is used for applying thick or granular mixtures, for example, liquid wallpaper. The faucet handle controls the flow of material. The solution is sprayed when the compressor is connected. The compressor power should not be lower than 5-6 bar. A receiver of 100 l or more is desirable for stable spraying of the mixture. A bucket sprayer for plastering is 3-4 times more productive than a cartouche gun. For 1 h, it covers up to 60 m² of wall. 4 nozzles evenly and quickly cover the wall. A hopper bucket is more demanding on the power and performance of a compressor than a gun.

Glue gun

Thermoelectric glue guns have been known for a long time. Low-powered work with lightweight materials. The smallest have a power of only 20 watts and operate in a wide voltage range - from 100 to 220 volts. Powerful are equipped with thick glue sticks. They emit several times more molten polymer. The glue gun is equipped with a metal stand, a protective cover. Glue sticks are sold in different colors - transparent, yellow, matte, black.

A hot glue device connects any surface with a non-shedding top layer:

  • paper;
  • the cloth;
  • wood;
  • metal;
  • stone and others.

The property of combining dissimilar materials has found application in many industries:

  • needlework;
  • packaging;
  • minor repairs;
  • construction and industrial work.

Neutral glue is relatively harmless.Light-transmitting glue sticks are versatile. Yellow are suitable for working with wood, cardboard. Black can be used for waterproofing.

Metal cutting head for screwdriver / drill

Able to work with an electric or pneumatic drill. Doesn't leave a burr. The nozzle in the literal sense of the word gnaws a strip 4 mm wide in sheet metal. It will be useful for the following work:

  • curly cutting;
  • cutting holes for pipes;
  • direct cutting;
  • corner cutting.

The maximum cut is 1.8 mm for steel, 2 mm for soft metals, plastic. Such a tool will find application in the repair and maintenance of automobiles.

Currently, just do the work yourself. Technology does not stand still. Previously, specialists did repairs for a lot of money. Now it is possible to purchase a tool in an online store and do the work yourself. Without a modern tool, there will be no quick work.