Everyone can afford to buy a unit for self-creating a man’s hairstyle, but not everyone knows how to care for him.

Why you need to configure

If you use the machine without settings, after a short period of time, its effectiveness can significantly decrease. This causes the following problems:

  • third-party sounds are heard;
  • the unit begins to heal strands of hair;
  • shearing is not even;
  • the blades are dull;
  • knives are out of balance;
  • the tool may not turn on.
To avoid these other problems, it is recommended that you periodically set up this equipment.

How to adjust the blades

To ensure efficient operation of the machine, the mandatory procedure is to adjust the blades. To do this, it is recommended to adhere to the following sequence of actions:

  1. Disconnect the unit from the mains. If the machine is a battery or combination type, remove the batteries.
  2. Using a Phillips screwdriver, loosen the screws and carefully remove the knives. Masters do not recommend using other devices to unscrew. This may lead to thread misalignment.
  3. A small brush is included. With its help, clean the blades from the remnants of hair and epithelium. If the dirt is not removed, the knives can be wiped with any special solution, and then with a cloth.

After that, the knives must be installed back and adjusted. To do this, you need:

  1. Tighten the screws so that the blades can be moved.
  2. Set the blades in such a position that the tooth located in the far right position is located in the lateral plane and does not move. In this case, the teeth that are on the left side must match exactly.
  3. Align the blades to their parallel position. The distance between them should be within 0, 5-1, 0 mm.
  4. Tighten the screws and grease them with oil.
The quick-detachable type of knives does not need to be adjusted. After each use, you just need to clean and lubricate them.

To obtain the necessary height for cutting hair, you need to perform blade adjustment. To do this, use the lever on the housing. When lifting the lever up, the blades rise to the upper position.

Tips for car care

To ensure the efficiency and safety of using the machine, it is recommended to adhere to certain rules of operation of the unit. For example:

  1. It is not recommended to cut wet or poorly combed hair.
  2. During the haircut, the machine should be moved in smooth movements.
  3. The nozzle must not be strongly pressed to the surface of the skin on the head.
  4. The network cable must not be bent.
  5. Knives must be cleaned and greased after each use.
  6. The unit body must not have cracks or chips.
  7. During storage, the electric wire should not be twisted.
  8. It is forbidden to wipe knives with plain water and leave them wet.
  9. To lubricate the knives, do not use machine or sunflower oil, as well as silicone greases.

You can configure the unit yourself without involving the services of a wizard. Subject to recommendations for the care of the unit, it will serve for a long time without breakdowns.